BIOLITE™ (for Shipboard Blown Optical Fiber)
PART#: 0745-1010
mil
BIOLITE™ is a trademark of BICC PLC and used under license.
The 0745-1010 Shipboard Blolite Support Kit contains all the tools needed to support the actual blowing of shipboard blown optical fiber. This kit enables the installer to switch and/or maintain inlet guides, as well as test the microduct. Specialty wrenches, sign-off sheets, cleaning wires, tube cutters, duct test head, and a new and improved SpadeLok™ Duct Connector Tool is included in this support kit. All tools are protected in a rugged, custom carrying case.
|
|
|
BIOLITE™ TESTING KIT (for Shipboard Blown Optical Fiber)
PART#: 0745-1020
mil
BIOLITE™ is a trademark of BICC PLC and used under license.
The 0745-1020 Duct Testing Kit contains all the tools needed to test the pressurized duct for leaks and blockage. Wrenches, tube cutters, duct test head, projectiles, remote end duct connectors and all support tools for 8mm and 5mm are included. All tools are protected in a rugged custom carrying case.
|
|
|
CASUALTY RESTORATION KIT NAVY SHIPBOARD FIBER OPTIC KIT
PART#: 0701-8000
NAVSEA#: 7344573
mil
(Emergency Repair Kit for 8mm, 7 Channel Shipboard Multiduct, Blown Optical Fiber)
The #0701-8000 KITCO Casualty Restoration Kit is designed to enable the installer to quickly restore a completely severed section of BOF (blown optical fiber). Eight 100 foot low smoke, zero halogen duplex shipboard COTS (Commercial off the Shelf) jumpers are included in the Casualty Restoration Kit.
These jumpers have M83522/16 ST connectors pre-installed on both ends to allow the technician to simply "plug and play." In a case where Blown Optical Fibers have been severed this kit includes 2 furcation units and all the tools necessary to install these units to prepare the blown fiber for connectorization. M83522/16 ST connectors and coupling adapters are also included as well as all appropriate connectorization tools. A rugged custom carrying case with shoulder strap protects all components and tools.
NOTE; THIS KIT IS CURRENTLY UNDER REVISION. PLEASE CALL FOR A CURRENT BILL OF MATERIALS AND FULL DETAILS PRIOR TO PLACING YOUR ORDER.
|
|
|
CLEANING KIT – TABLE 1G
PART#: 4000-1030
NAVSEA#: 7325763
mil
This cleaning kit has the appropriate tools necessary to clean the 12
Channel Hermaphroditic Connector with removable insert.
|
|
|
CONSUMABLES KIT – TABLE 1I
PART#: 4000-1050
NAVSEA#: 7325763
mil
This consumables kit has enough polishing paper, epoxy, syringes, tips, and
wipes to terminate 100 ST Connectors or Termini.
|
|
|
FDDI Connector Upgrade
PART#: 0801-8040
NSN#: 6080-01-431-0614
mil
The 0801-8040 FDDI Connector Tool Supplement Module allows the
installer to support FDDI connectorization aboard Navy vessels. This
“Add-On Module” includes: crimping tool w/die, curing fixture, FDDI to
ST adapters, 1 meter FDDI to ST jumper, FDDI polishing tool and FDDI
strip template.
|
|
|
Hermaphroditic Connector MQJ Set – Table 1E
PART#: 4000-1060
NAVSEA#: 7325763
mil
MQJs (Measurement Quality Jumpers) must be used to test optical link loss. By interfacing
the correct jumpers with a Light Source and Power Meter accurate loss measurements
can be obtained.
|
|
|
MIL-C-83522/16 Single Terminus Shipboard Kit (NAVSEA #6872811)
PART#: 0701-7010
NSN#: 5180-01-416-0565
NAVSEA#: 6872811
new
mil
This kit contains all the proper tools and consumables that are needed to connectorize the M83522/16 (ST) Light Duty, Single Terminus. This tool kit also supports the EIA/TIA 604-3 (SC) Connector. A 70-90 durometer resilient pad and one tenth micron diamond paper are included to allow the installer to accomplish an 'enhanced' singlemode polish. This Deluxe Contractor's Version meets NAVSEA #6872811 Drawing Requirements and also includes many other tools and components.
|
|
|
MIL-PRF-28876 Multiple Termini Navy Shipboard Fiber Kit
PART#: 0701-7000
NSN#: 5180-01-416-0567
NAVSEA#: 6872813
mil
The 0701-7000 MIL-PRF-28876 Multiple Termini Kit (Ceramic) contains
all the proper tools and consumables that are needed to connectorize the
M28876 Heavy Duty Multiple Termini connector. Tools and consumables
are included to support connectorization of the MIL-T-29504/14 and 15
Termini. A 70-90 durometer resilient pad and one tenth µm diamond paper
are included to allow the installer to accomplish an “enhanced” singlemode
polish. This deluxe contractor’s version meets NAVSEA #6872813 drawing
requirements, and also includes many other tools and components.
|
|
|
MQJ COMBO KIT – TABLE 1L
PART#: 4000-1085
NAVSEA#: 7325763
mil
This combination kit includes everything that is in Table 1G, Table 1J and Table 1K.
|
| Legend:
com = Commercial | mil = Military | new = New Product
|