| |
 |
Tools and Tool Kits
| SORT BY:
|
BIOLITE™ (for Shipboard Blown Optical Fiber)
PART#: 0745-1010
mil
BIOLITE™ is a trademark of BICC PLC and used under license.
The 0745-1010 Shipboard Blolite Support Kit contains all the tools needed to support the actual blowing of shipboard blown optical fiber. This kit enables the installer to switch and/or maintain inlet guides, as well as test the microduct. Specialty wrenches, sign-off sheets, cleaning wires, tube cutters, duct test head, and a new and improved SpadeLok™ Duct Connector Tool is included in this support kit. All tools are protected in a rugged, custom carrying case.
|
|
|
BIOLITE™ TESTING KIT (for Shipboard Blown Optical Fiber)
PART#: 0745-1020
mil
BIOLITE™ is a trademark of BICC PLC and used under license.
The 0745-1020 Duct Testing Kit contains all the tools needed to test the pressurized duct for leaks and blockage. Wrenches, tube cutters, duct test head, projectiles, remote end duct connectors and all support tools for 8mm and 5mm are included. All tools are protected in a rugged custom carrying case.
|
|
|
CASUALTY RESTORATION KIT NAVY SHIPBOARD FIBER OPTIC KIT
PART#: 0701-8000
NAVSEA#: 7344573
mil
(Emergency Repair Kit for 8mm, 7 Channel Shipboard Multiduct, Blown Optical Fiber)
The #0701-8000 KITCO Casualty Restoration Kit is designed to enable the installer to quickly restore a completely severed section of BOF (blown optical fiber). Eight 100 foot low smoke, zero halogen duplex shipboard COTS (Commercial off the Shelf) jumpers are included in the Casualty Restoration Kit.
These jumpers have M83522/16 ST connectors pre-installed on both ends to allow the technician to simply "plug and play." In a case where Blown Optical Fibers have been severed this kit includes 2 furcation units and all the tools necessary to install these units to prepare the blown fiber for connectorization. M83522/16 ST connectors and coupling adapters are also included as well as all appropriate connectorization tools. A rugged custom carrying case with shoulder strap protects all components and tools.
NOTE; THIS KIT IS CURRENTLY UNDER REVISION. PLEASE CALL FOR A CURRENT BILL OF MATERIALS AND FULL DETAILS PRIOR TO PLACING YOUR ORDER.
|
|
|
CLEANING KIT – TABLE 1G
PART#: 4000-1030
NAVSEA#: 7325763
mil
This cleaning kit has the appropriate tools necessary to clean the 12
Channel Hermaphroditic Connector with removable insert.
|
|
|
CONSUMABLES KIT – TABLE 1I
PART#: 4000-1050
NAVSEA#: 7325763
mil
This consumables kit has enough polishing paper, epoxy, syringes, tips, and
wipes to terminate 100 ST Connectors or Termini.
|
|
|
EconoKit Termination Tool Kit
PART#: 0700-7100
new
com
This kit is a complete fiber optic connector installation tool kit that uses the FiberSure™ 100 Anaerobic Adhesive System for high quality terminations. Affordable, compact and lightweight, the EconoKit has all the tools and consumables (except alcohol) needed to install up to 100 connectors right out of the case.
Highlights: Complete Intallation Kit
Step-by-Step Manual Included
Anaerobic Installation Method
Low Cost and Lightweight
Consumables Included
Custom Soft-Sided Case
The EconoKit includes: Soft-Sided Case, Crimp Tool, Crimp Dies, Scribe, Jacket Stripper, Buffer Stripper, 100x Microscope, Scissors, FiberSure™ 100 Primer, FiberSure™ 100 Adhesive, Alcohol Bottle, Water Bottle, Safety Glasses, Wipes, Marker, Ruler, Polishing Fixture, Syringes, Needle Tips, Polishing Pad, 1 and 5 Micron Polishing Film, Kit Key, Templates and Instruction Manuals.
|
|
|
Epoxy Termination Tool Kit
PART#: 0700-9400
com
Epoxy style connectors are a tried and true method of fiber termination and ideal for harsh environments. Technical advances in epoxy compositions, new convenient packaging and long-term durability make epoxy termination the proven choice for the professional installer.
Our epoxy series tool kits feature KITCO’s popular Quik-Temp epoxy ovens. These lightweight, low profile, compact ovens reach a preset curing temperature of 90°C in less than four minutes. Quik-Temp epoxy ovens are available with either 8 or 16 ports. These kits also include one crimp tool frame and three precision dies that allow the installer to terminate a wide variety of epoxy-style connectors.
The rugged hard shell case has a custom designed interior to hold all necessary tools plus additional storage for the installer. A roll-up pouch with a convenient hip strap allows the installer to wear the necessary hand tools to the work area.
Highlights: Includes Epoxy Quik-Temp Oven
Multiple Crimp Dies
Wearable Roll-Up Tool Pouch
Low Cost
Consumables Included
Upgradeable
The Epoxy Termination Kit includes: Hard Shell Case and Keys, Crimp Tool, 3 Crimp Dies, Scribe, Jacket Stripper, Buffer Stripper, 100x Microscope, Epoxy Oven, Debris Container, Canned Air, Alcohol Bottle, Water Bottle, Safety Glasses, Masking Tape, Epoxy, Wipes, Alcohol Pads, Utility Pouch, Tool Roll, Marker, Ruler, Curing Clips, Polishing Fixture, Syringes, Needle Tips, Cure Adapters, Polishing Pads, 1 and 5 Micron Polishing Film, Kit Key, Templates & Manuals.
|
|
|
FDDI Connector Upgrade
PART#: 0801-8040
NSN#: 6080-01-431-0614
mil
The 0801-8040 FDDI Connector Tool Supplement Module allows the
installer to support FDDI connectorization aboard Navy vessels. This
“Add-On Module” includes: crimping tool w/die, curing fixture, FDDI to
ST adapters, 1 meter FDDI to ST jumper, FDDI polishing tool and FDDI
strip template.
|
|
|
FITEL Handheld Fusion Splicer Kit
PART#: 0731-1100
com
FITEL Handheld Fusion Splicer Kit - FITEL’s new S122A handheld splicer is fully functional and designed specifically for FTTX applications. This handheld splicer is 1/3 the size of regular fusion splicers and can be operated in space-constrained areas using only one hand. The kit includes a high precision cleaver, stripper, battery and recharger, AC adapter, extra electrodes and 250µm fiber holders in a soft carrying case (900µm fiber holders are also available and are sold separately).
|
|
|
Go-KIT™ Deluxe
PART#: 0700-7115
new
com
The Go-KIT™ Deluxe is a professional grade all-inclusive field installation kit designed for termination of 2.5mm SC, ST, or FC connectors. This multi-purpose kit allows termination of up to one hundred multimode and fifty singlemode connectors while providing a portable work surface.
Includes:
Professional 2-level fiber optic jacket and buffer stripper
Universal SC, FC, ST Crimp Tool
Universal 2.5mm Polishing Puck and 1.25mm LC Polishing Puck
Glass Polishing Plate, 70 Durometer Polishing Pad and Polishing Paper
200X Professional Inspection Microscope with 2.5mm head
Kevlar Scissors, Reversible Blade Carbide Scribe and Permanent Marker
Protective Glasses and Debris Bottle for fiber safety
Alcohol wipes, lint free cleaning wipes, water bottle, and alcohol bottle
6 inch ruler for strip measurement
|
| Legend:
com = Commercial | mil = Military | new = New Product
|
|
|
| |
|
|