| |
 |
Tools and Tool Kits
| SORT BY:
|
Hot Melt Holder for ST and SC Hot Melts
PART#: 0700-5226
mil
com
These holders are used to successfully place 3M™ Hot Melt ST or SC connectors in the six-port Dual Purpose Epoxy and Hot Melt Oven (0700-9150).
|
|
|
Quik-Temp - 12 Hot Melt 12 Port Oven (High Capacity)
PART#: 0700-9130
com
KITCO’s line of UL listed Quik-Temp fiber optic ovens are designed to cure epoxy or soften pre-loaded adhesive inside a fiber optic connector. Small and lightweight for easy portability, these ovens are perfect for any job site, and are designed with the installer in mind. While many ovens take up to 30 minutes to reach proper curing temperature, Quik-Temp ovens are ready in less than four minutes! The aluminum heater block transfers the precise heat needed to cure most fiber optic epoxies, while keeping the housing cool to ensure a quick cool down. A detachable BME power cord allows for easy storage inside a termination kit. Both the Quik-Temp Epoxy 8-port and the 3M Hot Melt 6-port ovens are also now available with 230VAC power cords designed to accommodate most European power outlets. Made of rugged steel and powder-coat painted for durability, these ovens will last for many years.
Hot Melt Ovens -The Quik-Temp hot melt ovens come with either one or two 6 port heater blocks. These ovens feature exclusive built-in cooling ports. Factory set at 260°C for proper adhesive melting, these ovens are perfect for 3M hot melt connectors and also accept 3M’s hot melt connector holders.
|
|
|
Quik-Temp - 14 Dual-Purpose (Epoxy Hot Melt) 14 Port Oven
PART#: 0700-9150
com
Dual-Purpose Oven - The Quik-Temp Dual-Purpose Oven includes an 8 port epoxy heater block and a 6 port hot melt heater block, each with its own switch and set to its own precise temperature. Finally an installer can use one oven for both epoxy and hot melt applications!
|
|
|
Quik-Temp - 16 Epoxy 16 Port Oven (High Capacity)
PART#: 0700-9140
com
KITCO’s line of UL listed Quik-Temp fiber optic ovens are designed to cure epoxy or soften pre-loaded adhesive inside a fiber optic connector. Small and lightweight for easy portability, these ovens are perfect for any job site, and are designed with the installer in mind. While many ovens take up to 30 minutes to reach proper curing temperature, Quik-Temp ovens are ready in less than four minutes! The aluminum heater block transfers the precise heat needed to cure most fiber optic epoxies, while keeping the housing cool to ensure a rapid cool down. A detachable BME power cord allows for easy storage inside a termination kit. Both the Quik-Temp Epoxy 8-port and the 3M Hot Melt 6-port ovens are also now available with 230VAC power cords designed to accommodate most European power outlets. Made of rugged steel and powder-coat painted for durability, these ovens will last for many years.
Epoxy Curing Ovens -The Quik-Temp epoxy ovens come with either one or two 8 port heater blocks. These ovens are perfect for heat curing epoxies and are factory set at 90°C for proper epoxy curing.
|
|
|
Quik-Temp - 6 Hot Melt 6 Port Oven
PART#: 0700-9110
com
KITCO’s line of UL listed Quik-Temp fiber optic ovens are designed to cure epoxy or soften pre-loaded adhesive inside a fiber optic connector. Small and lightweight for easy portability, these ovens are perfect for any job site, and are designed with the installer in mind. While many ovens take up to 30 minutes to reach proper curing temperature, Quik-Temp ovens are ready in less than four minutes! The aluminum heater block transfers the precise heat needed to cure most fiber optic epoxies, while keeping the housing cool to ensure a rapid cool down. A detachable BME power cord allows for easy storage inside a termination kit. Both the Quik-Temp Epoxy 8-port and the 3M Hot Melt 6-port ovens are also now available with 230VAC power cords designed to accommodate most European power outlets. Made of rugged steel and powder-coat painted for durability, these ovens will last for many years.
Hot Melt Ovens -The Quik-Temp hot melt ovens come with either one or two 6 port heater blocks. These ovens feature exclusive built-in cooling ports. Factory set at 260°C for proper adhesive melting, these ovens are perfect for 3M hot melt connectors and also accept 3M’s hot melt connector holders.
|
|
|
Quik-Temp - 6 Hot Melt 6 Port Oven 230VAC
PART#: 0700-9115
com
KITCO’s line of UL listed Quik-Temp fiber optic ovens are designed to cure epoxy or soften pre-loaded adhesive inside a fiber optic connector. Small and lightweight for easy portability, these ovens are perfect for any job site, and are designed with the installer in mind. While many ovens take up to 30 minutes to reach proper curing temperature, Quik-Temp ovens are ready in less than four minutes! The aluminum heater block transfers the precise heat needed to cure most fiber optic epoxies, while keeping the housing cool to ensure a quick cool down. A detachable BME power cord allows for easy storage inside a termination kit. Both the Quik-Temp Epoxy 8-port and the 3M Hot Melt 6-port ovens are also now available with 230VAC power cords designed to accommodate most European power outlets. Made of rugged steel and powder-coat painted for durability, these ovens will last for many years.
Hot Melt Ovens -The Quik-Temp hot melt ovens come with either one or two 6 port heater blocks. These ovens feature exclusive built-in cooling ports. Factory set at 260°C for proper adhesive melting, these ovens are perfect for 3M hot melt connectors and also accept 3M’s hot melt connector holders.
|
|
|
Quik-Temp - 8 Epoxy 8 Port Oven
PART#: 0700-9120
com
KITCO’s line of UL listed Quik-Temp fiber optic ovens are designed to cure epoxy or soften pre-loaded adhesive inside a fiber optic connector. Small and lightweight for easy portability, these ovens are perfect for any job site, and are designed with the installer in mind. While many ovens take up to 30 minutes to reach proper curing temperature, Quik-Temp ovens are ready in less than four minutes! The aluminum heater block transfers the precise heat needed to cure most fiber optic epoxies, while keeping the housing cool to ensure a rapid cool down. A detachable BME power cord allows for easy storage inside a termination kit. Both the Quik-Temp Epoxy 8-port and the 3M Hot Melt 6-port ovens are also now available with 230VAC power cords designed to accommodate most European power outlets. Made of rugged steel and powder-coat painted for durability, these ovens will last for many years.
Epoxy Curing Ovens -The Quik-Temp epoxy ovens come with either one or two 8 port heater blocks. These ovens are perfect for heat curing epoxies and are factory set at 90°C for proper epoxy curing.
|
|
|
Quik-Temp - 8 Epoxy 8 Port Oven 230VAC
PART#: 0700-9125
com
KITCO’s line of UL listed Quik-Temp fiber optic ovens are designed to cure epoxy or soften pre-loaded adhesive inside a fiber optic connector. Small and lightweight for easy portability, these ovens are perfect for any job site, and are designed with the installer in mind. While many ovens take up to 30 minutes to reach proper curing temperature, Quik-Temp ovens are ready in less than four minutes! The aluminum heater block transfers the precise heat needed to cure most fiber optic epoxies, while keeping the housing cool to ensure a rapid cool down. A detachable BME power cord allows for easy storage inside a termination kit. Both the Quik-Temp Epoxy 8-port and the 3M Hot Melt 6-port ovens are also now available with 230VAC power cords designed to accommodate most European power outlets. Made of rugged steel and powder-coat painted for durability, these ovens will last for many years.
Epoxy Curing Ovens -The Quik-Temp epoxy ovens come with either one or two 8 port heater blocks. These ovens are perfect for heat curing epoxies and are factory set at 90°C for proper epoxy curing.
|
| Legend:
com = Commercial | mil = Military | new = New Product
|
|
|
| |
|
|