| |
 |
Tools and Tool Kits
| SORT BY:
|
1300 nm Laser set (with B603-ge probe and C601 light source)
PART#: 0705-7050
mil
com
FLASHdetector - This series of optical leak detection equipment is designed to locate energy leaks in fiber optic systems. These energy or light leaks can be caused by splice loss, connector loss, breaks in the fiber or excessive bending. Detecting signals as low as -65 dBm, the probe is more sensitive than most visible lasers and is virtually unaffected by room light. All FLASHdetector sets include a probe unit, light source, AC wall pack, hard sided waterproof case and instruction manuals.
|
|
|
1300 nm LED set (with B603-ge probe and C203 light source)
PART#: 0705-7040
mil
com
FLASHdetector - This series of optical leak detection equipment is designed to locate energy leaks in fiber optic systems. These energy or light leaks can be caused by splice loss, connector loss, breaks in the fiber or excessive bending. Detecting signals as low as -65 dBm, the probe is more sensitive than most visible lasers and is virtually unaffected by room light. All FLASHdetector sets include a probe unit, light source, AC wall pack, hard sided waterproof case and instruction manuals.
|
|
|
B603 Probe with Ge detector
PART#: 0705-7020
mil
com
FLASHdetector - This series of optical leak detection equipment is designed to locate energy leaks in fiber optic systems. These energy or light leaks can be caused by splice loss, connector loss, breaks in the fiber or excessive bending. Detecting signals as low as -65 dBm, the probe is more sensitive than most visible lasers and is virtually unaffected by room light. All FLASHdetector sets include a probe unit, light source, AC wall pack, hard sided waterproof case and instruction manuals.
|
|
|
CCMQJ Test Kit for ST/SC
PART#: 0705-5230
mil
com
Link loss testing is a critical part of ensuring that any fiber optic installation meets the desired performance criteria. Many installers are not yet aware of the importance of this testing or the necessity of using only Certified Commercial Measurement Quality Jumpers (CCMQJ’s) to ensure the test’s accuracy and repeatability.
KITCO Fiber Optics introduced CCMQJs after developing similar jumpers for the United States Navy. Jumpers used for link loss testing must incorporate high quality connectors, cable and components to provide accurate and consistent results. CCMQJs are manufactured using singlemode-quality connectors with zirconia ferrules and pre-radiused domed surfaces. Our strict assembly and testing procedures allow us to certify only cables that fall within a .01dB - .35dB loss range with a consistency of .05dB standard deviation. Because of these tolerances, a CCMQJ will correctly reject a link that does not meet the prescribed standards.
The CCMQJ Light Source and Power Meter Kit includes six CCMQJs (three ST/ST, two SC/SC and one ST/SC), as well as a precision light source and power meter with .01dB resolution. The light source and power meter are high quality devices that not only pass the Coupled Power Ratio (CPR) test but have also been approved for use by the United States Navy.
This kit also includes alcohol pads, appropriate couplings (adapters), an AC power pack, and detailed instruction manuals. All items are protected in a durable soft-sided case.
Use the KITCO CCMQJ Light Source and PowerMeter Test Kit to ensure that your installations meet the required performance criteria.
|
|
|
Hand Held LCD Video Display
PART#: 0700-8649
mil
com
Hand Held LCD Video Display with Power Supply
|
|
|
Light Source/Power Meter with ST/SC Adapters
PART#: 0705-5340
mil
com
Light Source/Power Meter with ST/SC Adapters
|
|
|
MM with hands free (VOX and headset with boom mic)
PART#: 0705-6030
mil
com
Voice Link Talk Sets - These provide the installer or test technician with a quick and simple voice communication link over a single optical fiber. Available for singlemode or multimode fiber, options include either a push-to-talk remote speaker/mic or a VOX unit with headset and boom mic. Sold as a pair, the talk set includes a hard sided waterproof carry case, instruction manual, 2 base units and 2 remote speaker/mics or VOX units.
|
|
|
MM with push-to-talk (remote speaker/mic)
PART#: 0705-6010
mil
com
Voice Link Talk Sets - These provide the installer or test technician with a quick and simple voice communication link over a single optical fiber. Available for singlemode or multimode fiber, options include either a push-to-talk remote speaker/mic or a VOX unit with headset and boom mic. Sold as a pair, the talk set includes a hard sided waterproof carry case, instruction manual, 2 base units and 2 remote speaker/mics or VOX units.
|
|
|
Replacement CCMQJ SC/SC
PART#: 0705-5320
mil
com
Replacement CCMQJ SC/SC
|
|
|
Replacement CCMQJ ST/SC
PART#: 0705-5330
mil
com
Replacement CCMQJ ST/SC
|
| Legend:
com = Commercial | mil = Military | new = New Product
|
|
|
| |
|
|