100X MICROSCOPE
PART#: 0700-8000
mil
This hand held microscope is perfect for checking a connector's endface for excess epoxy, core or
cladding chips or any other irregularities. This 100X "straight view" scope is easy to adjust and will
accept any 2.5µm ferrule. A special tygon tubing grips the ferrule so the installer does not have to
hold the connector in place. A convenient 8X eye loupe is built in as well. Batteries are included.
|
|
|
1300 nm Laser set (with B603-ge probe and C601 light source)
PART#: 0705-7050
mil
com
FLASHdetector - This series of optical leak detection equipment is designed to locate energy leaks in fiber optic systems. These energy or light leaks can be caused by splice loss, connector loss, breaks in the fiber or excessive bending. Detecting signals as low as -65 dBm, the probe is more sensitive than most visible lasers and is virtually unaffected by room light. All FLASHdetector sets include a probe unit, light source, AC wall pack, hard sided waterproof case and instruction manuals.
|
|
|
1300 nm LED set (with B603-ge probe and C203 light source)
PART#: 0705-7040
mil
com
FLASHdetector - This series of optical leak detection equipment is designed to locate energy leaks in fiber optic systems. These energy or light leaks can be caused by splice loss, connector loss, breaks in the fiber or excessive bending. Detecting signals as low as -65 dBm, the probe is more sensitive than most visible lasers and is virtually unaffected by room light. All FLASHdetector sets include a probe unit, light source, AC wall pack, hard sided waterproof case and instruction manuals.
|
|
|
AEROSPACE 1310NM AND 1550NM LASER SOURCE
PART#: 0705-5512
mil
Paired with the #0705-5220 Optical Power Meter the 0705-5512 facilitates certification of aircraft
harnesses and installed fiber optic links. The 0705-5512 provides dual 1310/1550nm output
with SAE AS062 launch profile for fiber applications per SAE aerospace standard ARP5061. The
0705-5512 is fitted with a precision Universal Connector Interface (UCI) which ensures maximum
accuracy and repeatability when performing critical measurements on fiber optic systems. A
comprehensive range of UCI adapters is available for all industry standard fiber optic connectors.
UCI adapters available separately. Call KITCO for details
|
|
|
AEROSPACE 850NM AND 1300NM DUAL LED SOURCE
PART#: 0705-5511
mil
Paired with the 0705-5520 Optical Power Meter, the 0705-5511 serves as an economical dual
wavelength LED source for testing the insertion loss of multimode fiber optic cables and connectors.
The 0705-5511 can also be used with an optical power meter for link loss testing of installed
cable plants. The 0705-5511 dual LED source is fitted with precision Universal Connector
Interfaces (UCI) which ensure maximum accuracy and repeatability when performing critical
measurements on fiber optic systems. A comprehensive range of UCI adapters is available for all
industry standard fiber optic connectors.
UCI adapters available separately. Call KITCO for details.
|
|
|
B603 Probe with Ge detector
PART#: 0705-7020
mil
com
FLASHdetector - This series of optical leak detection equipment is designed to locate energy leaks in fiber optic systems. These energy or light leaks can be caused by splice loss, connector loss, breaks in the fiber or excessive bending. Detecting signals as low as -65 dBm, the probe is more sensitive than most visible lasers and is virtually unaffected by room light. All FLASHdetector sets include a probe unit, light source, AC wall pack, hard sided waterproof case and instruction manuals.
|
|
|
BACK PLANE VIDEO FIBER INSPECTION PROBE KIT
PART#: 0700-8770
mil
The Back Plane Video Fiber Inspection Probe Kits contain a portable, handheld microscope and
the appropriate probes to inspect installed connectors located within patch panels, eliminating the
need to access the backside of the patch panel. The VFIP Kit will also allow an installer to inspect
MQJs (Measurement Quality Jumpers or any M28876 cable assemblies) without disassembling
them; the alignment sleeve in the socket (receptacle side) does not need to be removed to view the
endface. All products are packaged in a customized hard shelled case for protection, convenience
and portability. The #0700-8770 contains a 400X Video Probe.
|
|
|
BACK PLANE VIDEO FIBER INSPECTION PROBE KITS
PART#: 0700-8640
mil
The Back Plane Video Fiber Inspection Probe Kits contain a portable, handheld microscope and
the appropriate probes to inspect installed connectors located within patch panels, eliminating the
need to access the backside of the patch panel. The VFIP Kit will also allow an installer to inspect
MQJs (Measurement Quality Jumpers or any M28876 cable assemblies) without disassembling
them; the alignment sleeve in the socket (receptacle side) does not need to be removed to view the
endface. All products are packaged in a customized hard shelled case for protection, convenience
and portability. The #0700-8640 kit contains a 200X Video Probe
|
|
|
Biconic Digital Length Gauge
PART#: 0701-6035
NSN#: 6625-01-562-0546
new
mil
The 0701-6035 Biconic Digital Length Gauge is designed to accurately measure the height of the Biconic support cone during the polishing process. The gauge reads in both inches and millimeters.
|
|
|
CCMQJ Test Kit for ST/SC
PART#: 0705-5230
mil
com
Link loss testing is a critical part of ensuring that any fiber optic installation meets the desired performance criteria. Many installers are not yet aware of the importance of this testing or the necessity of using only Certified Commercial Measurement Quality Jumpers (CCMQJ’s) to ensure the test’s accuracy and repeatability.
KITCO Fiber Optics introduced CCMQJs after developing similar jumpers for the United States Navy. Jumpers used for link loss testing must incorporate high quality connectors, cable and components to provide accurate and consistent results. CCMQJs are manufactured using singlemode-quality connectors with zirconia ferrules and pre-radiused domed surfaces. Our strict assembly and testing procedures allow us to certify only cables that fall within a .01dB - .35dB loss range with a consistency of .05dB standard deviation. Because of these tolerances, a CCMQJ will correctly reject a link that does not meet the prescribed standards.
The CCMQJ Light Source and Power Meter Kit includes six CCMQJs (three ST/ST, two SC/SC and one ST/SC), as well as a precision light source and power meter with .01dB resolution. The light source and power meter are high quality devices that not only pass the Coupled Power Ratio (CPR) test but have also been approved for use by the United States Navy.
This kit also includes alcohol pads, appropriate couplings (adapters), an AC power pack, and detailed instruction manuals. All items are protected in a durable soft-sided case.
Use the KITCO CCMQJ Light Source and PowerMeter Test Kit to ensure that your installations meet the required performance criteria.
|
| Legend:
com = Commercial | mil = Military | new = New Product
|