| |
 |
Tools and Tool Kits
| SORT BY:
|
1.60mm Light Source Adapter Cap
PART#: 0799-2092
new
mil
com
The 1.60mm blue adapter cap is designed to work with the 0700-8500 FiberSure Light Source. Works with the M29504/4/5/6/7 termini.
|
|
|
Aviation Fiber Optic Inspection & Cleaning Kit
PART#: 0741-8010
new
com
The Aviation Fiber Optic Inspection and Cleaning Kit was designed with input from the Commercial Air Transport Industry. This kit is designed to inspect and clean the most common types of fiber optic connectors found onboard the aircraft.
This kit will allow the technician to inspect and clean the following fiber optic connectors/termini:
* M38999 Plug Connectors
* ARINC 801 Circular Connectors
* ARINC 600 Rectangular Connectors
* EPX Rectangular Connectors
* Quadrax Size 8 Connectors
* ARINC 801 Termini
* EN 4531 Termini
* M29504/04 Pin Termini
* M295-4/05 Socket Termini
* ST Connectors
* SC Connectors
* FC Connectors
* LC Connectors
|
|
|
Aviation Fiber Optic Inspection & Cleaning Kit
PART#: 0741-8015
new
com
This kit is designed to test the fiber optic endface using a laptop computer and software that will give the technician a Pass or Fail inspection result. The software also allows the technician to capture a picture of the endface and save the test results. The kit will also clean the most common types of fiber optic connectors found onboard the aircraft.
This kit will allow the technician to inspect and clean the following fiber optic connectors/termini:
* M38999 Plug Connectors
* ARINC 801 Circular Connectors
* ARINC 600 Rectangular Connectors
* EPX Rectangular Connectors
* Quadrex Size 8 Connectors
* ARINC 801 Termini
* EN 4531 Termini
* M29504/04 Pin Termini
* M29504/05 Socket Termini
* ST Connectors
* SC Connectors
* FC Connectors
* LC Connectors
|
|
|
Aviation Programmable Oven
PART#: 0721-1305
new
mil
com
The 0721-1305 Aviation Programmable Oven is designed to cure aerospace fiber optic epoxies using a 4 step temperature cure schedule. The oven is pre-programmed with the NAVAIR cure schedule for Epo Tek 353ND epoxy. The cure schedule can be easily changed to meet your epoxy cure temperature requirements. The ramp time, soak time, and cure temperature can be changed within the cure schedule program.
The oven comes with our new redesigned heating block which will accommodate up to 36 fiber optic connectors/termini at the same time. The block will cure 12 of the ST,SC, FC or LC connectors and 24 fiber optic termini.
The following is a list of the fiber optic termini that will fit in the heating block:
• M29504/04 Pins
• M29504/05 Sockets
• M29504/14 Pins
• M29504/15 Sockets
• ARINC 801
• Elio (EN 4531)
|
|
|
Commercial Aviation Fiber Optic Termination Kit
PART#: 0741-8000
new
mil
com
The 0741-8000 Aviation Termination Kit is designed to terminate and/or repair M29504/4 and M29504/5 termini for circular M38999 connectors.
This kit will also terminate the ARINC 801 termini, Elio (EN4531) termini, the M83522/16 ST connectors as well as the approved Commercial Off the Shelof (COTS) ST and SC connectors, and LC connectors. This kit contains all of the tooling and consumables required to completely terminate all of the termini and connectors listed above for installation of fiber optics in harsh environments onboard the aircraft. This kit meets and exceeds all of the current military Aviation Termination Kit requirements, and the rugged hard shell case meets the MIL-STD-810F requirements.
|
|
|
EconoKit Termination Tool Kit
PART#: 0700-7100
new
com
This kit is a complete fiber optic connector installation tool kit that uses the FiberSure™ 100 Anaerobic Adhesive System for high quality terminations. Affordable, compact and lightweight, the EconoKit has all the tools and consumables (except alcohol) needed to install up to 100 connectors right out of the case.
Highlights: Complete Intallation Kit
Step-by-Step Manual Included
Anaerobic Installation Method
Low Cost and Lightweight
Consumables Included
Custom Soft-Sided Case
The EconoKit includes: Soft-Sided Case, Crimp Tool, Crimp Dies, Scribe, Jacket Stripper, Buffer Stripper, 100x Microscope, Scissors, FiberSure™ 100 Primer, FiberSure™ 100 Adhesive, Alcohol Bottle, Water Bottle, Safety Glasses, Wipes, Marker, Ruler, Polishing Fixture, Syringes, Needle Tips, Polishing Pad, 1 and 5 Micron Polishing Film, Kit Key, Templates and Instruction Manuals.
|
|
|
Elio Fiber Optic Inspection and Cleaning Kit
PART#: 0741-8011
new
com
The Elio FIber Optic Inspection and Cleaning Kit was designed to inspect and clean the Souriau Elio Termini (EN 4531) that are installed in either circular (m38999) style connectors or rectangular (ARINC 600) aerospace connectors.
This kit contains the following items:
* Video Inspection Display
* Fiber Optic Viceo Probe
* Universal 2.50mm Video Probe Tip
* Visual Fault Locator (VFL)
* Fiber Optic Cleaning Fluid
* Fiber Optic Cleaning Wipes
* Elio 2.50mm Plug Side Fiber Optic Cleaning Sticks
* Elio 2.50mm Receptacle Side Fiber Optic Cleaning Sticks
* Elio 2.50mm Cleaning Tool
* Insertion/Extraction Tools for the Elio Terminus
|
|
|
Elio Fiber Optic Termination Kit
PART#: 0741-8005
new
com
The Elio Fiber Optic Termination Kit was designed with input from the Commercial Air Transport Industry. This kit is designed to terminate the Souriau Elio Terminus (EN 4531) for installation into circular and rectangular aerospace connectors.
This kit contains the following items:
* 230 VAC Epoxy Curing Oven, 8 Port, CE Approved
* EPO-TEK 353ND Eposy
* All required polishing films
* 2.50mm Carbide Tungsten Polishing Puck
* 200X hand held microscope
* All required termination tooling
* Insertion/extraction tools for the Elio terminus.
|
|
|
Fiber Optic Cleaning Fluid
PART#: 0700-5175
new
mil
com
The 0700-5175 is a uniquely formulated fiber preparation and cleaning fluid that is non-pressurized and categorized as a non-hazmat chemical, which eliminates restrictions on air transport and shipping. The chemical is perfect for cleaning the glass during inspection, connectorization or fusion splicing procedures and leaves absolutely no residue or films like traditional alcohol based products. The formulation cleans at the microscopic particle level and leaves no oils, water spots or static bonds. Since the product is highly stable it has an extremely long shelf life. A special dispenser allows the Warfighter to dispense this product either with an attachable tube or by a pumping action which produces a small pool of fluid which can be absorbed by the 0700-5165 Fiber Optic Cleaning Wipes.
|
|
|
Fiber Optic Cleaning Wipes
PART#: 0700-5165
new
mil
com
The 0700-5165 Fiber Wipes are specifically designed to clean the optical and connector endfaces that the Warfighter will encounter in the "Military/Commercial" and TFOCA arenas. These wipes are perforated for ease of use with the 0700-5175 Fiber Cleaning Fluid companion product. The surgically clean, hydro-entangled material is soft and completely 'lint-free.'
|
| Legend:
com = Commercial | mil = Military | new = New Product
|
|
|
| |
|
|